Eleven Hours and Seven Thousand Square Feet

I cannot tell you the last time I went into weekend with no work or social obligations, all my project materials lined up, and a full two days to get shit done.


The shit I’m referring to in this case is everything I’ve managed to pile haphazardly out in the pole barn over the last four years. (Plus a few things that came with the place and that I’ve never taken the time to clean out.)

I had a dumpster out here a few weekends ago so that I could get rid of the construction debris that was piled up from tearing out most of the bathrooms and a good portion of my kitchen over the last few years.



Because my hobbies include 1.) making as much rubble in my life as possible, and 2.) …. Yeah. Actually, that’s basically it.

But getting rid of the rubble was just the beginning. There is a bunch of stuff that I intend to legitimately store in the barn long term, and a bunch of other stuff that is temporarily being stored there before going to craigslist or the restore, plus the everyday vehicles (like the tractor, golf cart, mower, and trailers) and storage vehicles that friends and family keep in the barn but aren’t taken out very often. (Oh, and let’s not forget an entire barn’s worth of bricks, concrete blocks, barn wood, and old barn beams hiding on the back wall of the barn.) All of which needed to be organized and appropriately stored.

So my first plan was to get everything I possibly could off the ground, particularly on the section of the barn that has a paved floor.



This picture captures an area of space that is roughly equivalent to the entire bottom floor of my house.

Also, there was this interior overhang built over the man-door that served no real purpose and needed to be taken down. More rubble!


So. Five hours and a fair amount of swearing later…


I went back and forth on building kayak racks myself, but finally caved and bought these through amazon. Getting the kayaks off the ground was huge.

I also put up a couple of shelving units…


I bought the industrial unit on the right a few months ago but hadn’t assembled it yet, and the wire shelves are another hand-me-down from my mom. I’ve got a bunch of cabinet doors and old windows salvaged from different jobsites that I can’t seem to part with (you never know when you may need a dozen matching cabinet doors, right?) The shelves help keep all of that, plus gas cans and other miscellaneous mechanical equipment, “neatly” organized. I suspect the shelves won’t look this empty for long.

After the shelves and kayaks were up, there was a lot of muscling large cabinets and other things around to clear up floor space…


(Sidenote: I started a new Instagram account recently which is now linked in the sidebar… more on that later, but maybe one of my favorite comments ever was posted to it here by @marriedtothephotographer.)

Anyway, the end result on this side of the barn is amazing.





I’m not even bothered by messes and that “before” picture is making my eye twitch now. And of all the things in the world I can do, I almost never want to give myself a pat on the back for my cleaning skills, but holy shit was that a project.

And, not to be kept from my power tools for too long, I also started building some lumber storage racks on the other side of the barn where all of the old construction debris had been.


The racks are built entirely with 2x4s… not pretty, but functional. I used ring-shank nails in my framing nailer to assemble most of this because it’s significantly faster than using screws.

Here’s an in-progress pic of the second shelf:


I nailed a bunch of 2×4’s up between the posts of the pole barn, then leveled a bunch of nailers on them. (While the nailers aren’t meant to be structural, it’s a hell of a lot easier to install wood screws on an angle with the nailers there to support the boards.)


So I tacked 20″ shelves to the nailers, and also attached a 45-degree support brace with the framing nailer, then drilled 2 deck screws into the top of each shelf to attach it to the vertical supports.


Hello, Makita, I’ve missed you.

I also used a couple of wood screws at the very top of the vertical supports. (Basically I used screws everywhere the weight of the shelves would be most concentrated, and then nails everywhere else.)


Here are the first two shelves of the rack. There are a lot of ways you can construct wood shelves without those angle supports, which would give you more storage space, but… space isn’t my issue so much as time, so I went with the quickest construction possible.

And even with the shelf complete it barely made a dent in the first of my 3 barn-wood piles…


Progress is progress though. I suspect I’m going to have to build half a dozen more of these lining the walls of the barn before I’ve got all the barn wood organized. (Ha.)

So. That’s what eleven hours of work in the barn this weekend amounts to. I made a fair amount of progress getting the whole thing cleaned up and organized, although judging by the current state of my laundry and dishes perhaps I should have allocated some time to cleaning up the actual house I live in as well…



But if anyone is looking for me… I’ll be hanging out in the barn.

from Bathroom & Home http://diydiva.net/2016/10/eleven-hours-and-seven-thousand-square-feet/


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s